Roof rack for Jeep Gladiator JT

This Slimline II Roof Rack Kit contains all the components needed to mount the Slimline II Roof Rack to a Jeep Gladiator JT, including the Slimline II Tray (1425mm x 1560mm), the mounting system and a wind deflector. Drilling is required for installation.

This rugged, sophisticated, high performance, nearly indestructible roof rack system allows for quick panel removal and works with or without the hard top roof.

All Front Runner roof rack kits contain installation instructions as well as all the components necessary to install the Slimline II roof rack on your vehicle.

All Front Runner roof racks are backed by a Limited Lifetime Warranty*

For more information on installation, please see the assembly instructions in the INSTALLATION tab.

The Jeep Extreme mounting system bolts to the roll bar with center and rear mounts. This low-profile, high-performance, nearly indestructible mounting solution allows for quick panel removal and works with either a hard top or no top. The panels can be quickly and easily removed with the roof rack in place. Cargo weight is evenly distributed across the Jeep's roll bars and body, placing zero weight on the hardtop itself.

Note: This kit is not suitable for Mojave Edition and Diesel models of the Jeep Gladiator.

KRJG005T - Jeep Gladiator JT (2019-Current) Extreme Roof Rack - by Front Runner

It consists of: 
1 x FAJL004 Front Roof Rack Mount for Jeep Wrangler JL (2018-Current) - by Front Runner
1 x FAJT001 Fixing Rails for Jeep Gladiator JT (2019-Current) - by Front Runner
1 x FAJT002 Inner Brackets for Jeep Gladiator (2019-Current) - by Front Runner
1 x RRSTJ08 Slimline II Roof Rack – 1425mm (width) x 1560mm (length) – by Front Runner
1 x WDST006 45mm wide / 1345mm (width) wind deflector – by Front Runner

Used materials:
T6 aluminum with black epoxy powder coating
3CR12 stainless steel

Approximate installation weight: 35kg (78lbs)

The standard 8mm screw fits into the T-slot at the top and bottom of the plate.

To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm/ 2″) to the height of the foot, the Grab-On foot or the Strap-On foot listed above.

If the Slimline II bar needs feet, you have to add the height of the Slimline II tray (50mm/ 2″) to the height of the foot to determine the height of the bar from the rain gutter.

If the bar needs fixing rails, you have to add the height of the Slimline II tray (50mm/ 2″) to the height of the fixing rails to determine the height of the bar from the highest point of the vehicle roof.

Shipping Dimensions:
Width: 520mm (20″)
Length: 1615mm (64")
Height: 450mm (18”)

Shipping Weight: 
Weight: 41.0kg (90.1lbs)