This 1/2 size Slimline II Roof Rack Kit contains all the parts needed to mount the Slimline II Roof Rack to the Jeep JL 4 Door including the Slimline II Roof Rack (1425mm x 1358mm), the Jeep Extreme Mounting System and a wind deflector. Drilling is required for installation.
The JL Extreme mounting system bolts to existing mounting points on the car and the roll cage tube. This low-profile, high-performance, and nearly indestructible mounting solution allows you to quickly remove your Freedom panels with the roof rack in place. The windshield can also be lowered without any interference. Cargo weight is evenly distributed across the roll bars and body of the Jeep, placing zero weight on the hard top.
All Front Runner Roof Rack Kits come with installation instructions as well as all the components needed to mount the Slimline II to your vehicle.
These foot rails have 1 opening for Front Runner camp table access (1 small prep table and 1 larger table).
All Front Runner roof racks are backed by a limited lifetime warranty. *
For more information on installation, see the mounting instructions in the installation tab.
NOTE: This kit cannot be used in conjunction with the soft top roof or SkyOne-Touch Power soft top.
It consists of:
1 x FAJL002 Fixing Rails for Jeep Wrangler JL (2018-Current) - by Front Runner
1 x FAJL003 Inner Brackets for Jeep Wrangler JL 4Door (2018-Current) - by Front Runner
1 x RRSTJ07 Slimline II Roof Rack 1425mm(width) X 1358mm(length) – by Front Runner
T6 aluminum with black epoxy powder coating
3CR12 stainless steel
Approximate Installation Weight: 29kg (64lbs)
The standard 8mm screw fits into the T-slot at the top and bottom of the plate.
To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm/ 2″) to the height of the foot, the Grab-On foot or the Strap-On foot listed above.
If the Slimline II bar needs feet, you have to add the height of the Slimline II tray (50mm/ 2″) to the height of the foot to determine the height of the bar from the rain gutter.
If the bar needs fixing rails, you have to add the height of the Slimline II tray (50mm/ 2″) to the height of the fixing rails to determine the height of the bar from the highest point of the vehicle roof.
Width: 455mm (18″)
Length: 1610mm (63″)
Height: 255mm (10″)
Weight: 33.8kg (74.4lbs)
Not yet reviewed