Slimline II Roof Rack for Ford Ranger T6 Wildtrak Rails

This 1156mm/45.5″ Full Size Slimline II Roof Rack Kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to install the Slimline II Roof Rack to the raised rails of your Ford Ranger. T6 Wildtrack. Easily installs with Grab-On Grip Feet on existing factory raised rails. No drilling required.

All Front Runner Roof Rack Kits come with installation instructions as well as all the components needed to mount the Slimline II to your vehicle.

Note: Your vehicle must be equipped with the factory raised rails in order to use this roof rack kit.

This kit can be removed leaving your vehicle's roof and raised rails in their original condition.

For a stronger cargo carrying solution, Front Runner offers a specific rail system to install the roof rack on your vehicle. Front Runner rails are installed by removing the factory or used rails if they do not have rails installed.

Factory rail kits are designed as a "light" load solution. Please consult your vehicle owner's manual for the manufacturer's recommended load capacity and do not exceed these limits.

For optimal load capacity, we recommend that there be no cargo overhang (excluding sports equipment) and that all weight be distributed evenly across the roof rack.

Factory rail kits are not suitable for extreme off road conditions and therefore you should consider a different Front Runner mounting solution if this is your purpose.

It consists of:
2 x GOFR001 Rail Bases (pair) - by Front Runner
2 x GORR053 External Grab-On Grip Feet / No 4 – by Front Runner
2 x GORR073 Internal Grab-On / D Grip Feet – by Front Runner
1 x RRAC904 Plastic spacer for rail base / 10mm (pair)
1 x RRSTA06 Slimline Tray II 1165mm (width) x 1156mm (length) – by Front Runner
1 x WDST011 Wide lip wind deflector 20mm / 1165mm(width) – by Front Runner

Used materials:
T6 aluminum with black epoxy powder coating
3CR12 stainless steel

Approximate Installation Weight:20kg (43lbs)

The standard 8mm screw fits into the T-slot at the top and bottom of the plate.

To determine the approximate height from the roof of your vehicle to the top of the Slimline II bar, you need to add the height of the Slimline II tray (50mm/ 2″) to the height of the foot, the Grab-On foot or the Strap-On foot listed above.

If the Slimline II bar needs feet, you have to add the height of the Slimline II tray (50mm/ 2″) to the height of the foot to determine the height of the bar from the rain gutter.

If the bar needs fixing rails, you have to add the height of the Slimline II tray (50mm/ 2″) to the height of the fixing rails to determine the height of the bar from the highest point of the vehicle roof.

Shipping Dimensions:
Width: 455mm (18″)
Length: 1610mm (63″)
Height: 285mm (11″)

Shipping Weight: 
Weight: 22.8kg (50.2lbs)