For a relaxing break in the fresh air
With the seat cushion you turn your Petromax cooler into a rest area anywhere.
The elastic foam cushion core ensures optimal weight distribution and allows you to sit comfortably. The cushion is covered with a ripstop fabric (thickness 600D) that is hard-wearing and impervious to dirt. Mud stains are easily removed with a brush, while stubborn dirt areas can be removed with a damp cloth.
The mesh fabric on the underside of the cushion provides a durable non-slip coating for optimal support. At the same time, it promotes air circulation and quick drying after a downpour.
The embroidered logo on the top of the cushion gives it an attractive and refined look.
Comfort at the push of a few buttons
The convenient 4-button system allows you to quickly attach and remove the seat cushion. The corresponding counter-buttons, which must be placed on the lid of the kx25 fridge before first use, are included in the delivery.
Instructions for placing the seat cushion in the fridge
Tools needed: Phillips screwdriver
1. First clean the four holes in the lid of the thermos cooler and dry them well.
The counters should only be hand-tightened to avoid crushing or damaging the rubber gaskets on the fridge.
3. Place the seat pad (mesh fabric side down) in the cooler and check the alignment.
4. Connect each of the four snaps on the tabs to the corresponding counterparts on the fridge.
To remove, loosen the clasps on the four cushion flaps one after the other and towards the sides of the lid to prevent them from tearing.
Material (upper): ripstop fabric (600D)
Material (bottom): mesh cloth
Material (inner): foam
Dimensions: (H x W x D): 5,5 x 56 x 38,5 cm
Weight: 487 g
1 x seat cushion for kx25 Petromax Cooler
4 x counter-buttons
Not yet reviewed